SUPPLIER OF PURE OXIDIZED BITUMEN 115/15 FROM DUBAI UAE

Oxidized Bitumen 115/15

WHAT IS OXIDIZED BITUMEN 115/15?

Oxidized Bitumen 115/15, also called Blown Asphalt, is produced by blowing hot air through bitumen 60/70 at 230°C, resulting in a higher penetration index. It is semi-solid and exhibits excellent stability, high softening and flash points, making it ideal for construction. It provides superior adhesive and waterproofing properties when heated. Produced from vacuum bottom (VB) in a controlled air-blowing process, oxidized bitumen becomes harder, more viscous, and less volatile, suitable for uses like roofing asphalts and various industrial applications.

USES OF OXIDIZED BITUMEN 115/15

Oxidized bitumen 115/15 is used as raw material for bitumen coat, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, crack seals and repairs, civil works, construction industries; pavement, sealing and insulating buildings, insulation and isolation bitumen membrane sheet, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, to manufacture rubber and plastic products. Oxidized bitumen 115/15 products are for paving, roofing; also used in asphalt-based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, the base for synthetic turf; typical uses for bitumen 115/15 include roofing, pipe coating, hydraulic applications. Most bitumen 115/15 used to produce “mopping-grade” roofing asphalts. The special usage of oxidized bitumen 115/15 is bitumen paint manufacturing and oil well drill fluids. Oxidized bitumen 115/15 is used in roofing manufacturing plants to produce shingles, roll goods, built-up roofing felts. It’s used as raw material for bitumen coats, roofing, and insulation also in the Isolation bitumen membrane sheet. Also Oxidized asphalt 150-5 uses in chemical, fuel, paints, lacquers, varnishes, paper-pulpboard, and textile processing. In road construction, pavement, crack seal and repairmen, civil works, roofing also construction. In addition, it uses for sealing and insulating buildings, adhesive, construction materials additive, dust-binding, and coating. With a wide range of uses in insulating and impregnating agents, make rubber and plastic products. The blown asphalt 115/15 products are for paving, and roofing. Also used in asphalt-based paints for corrosion protection of metals, inlining public works structures, adhesives in electrical laminates, and base for synthetic turf. Typical uses for Oxidized Bitumen 115/15 also include roofing, pipe coating, Portland cement pavement, hydraulic applications, and paint manufacturing.

ADVANTAGES OF BLOWN BITUMEN 115/15

• Quality assured manufacture.
• Conforms to ASTM standards with regards to softening point and penetration.
• Competitive and fair price.
• Prompt and on-time Delivery
• Weatherproof blown asphalt packaging for flexibility of storage.
• Various Kinds of Blown Asphalt packing according to Customer’s Purpose. (Meltable Bag, Kraft Bag, Carton Box, Block, Keg, Drum)
• High Monthly Capacity for producing Oxidized Bitumen
• High Purity Oxidized Bitumen (Blown Asphalt) without Using Gilsonite and any other impurities
• Oxidized Bitumen packages wrapping can be melted in conventional boilers without the need for removal
• Blown Asphalt Carton Boxes packing have a non-stick insider layer that removes easily on Bitumen
• Full Coverage and support
• It is long-lasting
• It is not easily damaged by water
• This bitumen has suitable flexibility which prevents the pavement from cracking
• It has good resistance to change in a chemical reaction

KEY DIFFERENCES BETWEEN OXIDIZED BITUMEN 115/15 AND OTHER GRADES

Oxidized Bitumen 115/15 differs from other grades primarily in its hardness, softening point, and applications. It has a softening point around 115°C and penetration of 15 dmm, making it stiffer and more stable at high temperatures compared to softer grades like 85/25 or 95/25, which have lower softening points and higher penetration values. While 115/15 is ideal for applications requiring high durability, such as roofing, pipe coating, and corrosion protection, softer grades are better suited for projects that need more flexibility, like crack sealants and adhesives.

SURFACE PREPARATION 

Before using Oxidized Bitumen 115/15 surfaces must be dry, clean, and free of loose types, curing products, disorders, and slurry. Furthermore, if you use this type of bitumen without cleaning the area bitumen 115/15 will easily remove.

TECHNICAL ADVANTAGES OF BLOWN ASPHALT 115/15

• Durability
• Flexibility
• Water-Resistant
• Chemical Stability

Compared to paving grade bitumen:

• Reduced temperature susceptibility
• Exhibits a more ‘solid’ nature at ambient temperatures
• High penetration index

BLOWN ASPHALT PROPERTIES

Air blowing of vacuum-reduced bitumen causes marked changes in the properties and constitution of the material. Blown Bitumen is harder and has higher softening points than the original material and the changes in physical properties appear to be related to the asphaltene content which increases with the temperature and duration of the blowing process. Analytical data indicate that conversion of the original resins to asphaltenes and the formation of new resins from the oils occur simultaneously. Specs also provide feasible representations of the pathways of bitumen maturation and asphalt deterioration.

STORAGE & HANDLING 

Heating of packaged bitumen is a critical phase in most of the final uses. Typically, the packaged material is heated and melted in boilers out on site. However, control at the heating phase is very important in terms of health and safety as well as in maintaining the quality of the product. Note must be taken of the maximum safe handling temperature of 230 C and this should not be abused. Bitumen is a poor conductor of heat, consequently, control of the heating phase is of paramount importance. The Oxidized Bitumen material should be broken up prior to placement in the boiler. This exposes a larger surface area to the heat and encourages a more even heating regime. Without the larger exposed surface area, aggressive heating at the base and sides of the boiler may well result in localized overheating, altering the characteristics of the RAHA OIL modified bitumen and potentially causing thermal cracking of the bitumen, creating the release of low lash vapors. The flash point of the oxidized bitumen then becomes irrelevant; as these low flash vapors determine the fire risk. Melted bitumen should not be left in the boiler and reheated from cold, as there is then a high potential for localized overheating around the heating area (lack of convection means poor heat transfer) and potential development of a pressurized pocket of low flash vapors. Be aware of the placement of any temperature monitoring or control devices. As a result of the poor thermal conductivity of the bitumen, a thermometer in the bitumen some distance from the heat source could read significantly different (even hundreds of degrees) from the true temperature of the bitumen near the heat source.

HEALTH & SAFETY OF BLOWN ASPHLAT 115/15

Workers should wear protective masks, gloves, and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline. Care should be taken when heating Blown Asphalt 115/15 to avoid over heating.

PACKING OF OXIDIZED BITUMEN 115/15

Packing of Oxidized Bitumen 115/15

Bitumen 115/15 is available in 20 & 50 Kg Kraft Paper Bags / Poly Amide Bags, 25 Kg Carton box & 200 Kg Steel Drums.

• Bulk
• Carton
• Laminate bag
• Craft bag
• Jumbo bags are the most environmentally friendly packaging for blown asphalt 115/15
• Polyamide melt-able bags whose melting temperature is 160 to 180 C and has a capacity of 25 to 50 kg.

TECHNICAL DATA SHEET OF BLOWN ASPHALT 

Bitumen 115/15	TEST METHOD	UNIT	SPECIFICATION
Specific gravity @ 25/25 °c	ASTM D70	Kg/cm³	1.05 approx
Penetration @ 25°c	ASTM D5	mm/10	10-20
Softening point °c	ASTM D36	°C	110-120
Ductility @ 25°c	ASTM D113	cm	1.5 Min
Loss on heating(wt) %	ASTM D6	wt %	0.2 max
Flashpoint °c	ASTM D92	°C	250 min
Solubility is CS2(wt) %	ASTM D4	wt %	99.5 max
Spot test	A.a.s.h.o.t102	-	Negative