semi refined paraffin wax 1-3 % oil content
semi refined paraffin wax 1-3% oil content
Semi Refined Paraffin Wax 1-3% Oil Content Introduction
Heavy paraffin wax is a type of paraffin wax characterized by its higher molecular weight and a small percentage of oil content, ranging from 1 to 3%. It is widely used in various industries due to its physical properties and versatility.
RAHA Group offer a premium quality of Semi Refined paraffin Wax, which is manufactured using approved raw materials such as slack wax. Our range is capable to cater the varied requirements of cosmetic, candle, polishing and various industries. These are free from any types of foreign materials. These are available at the competitive prices to suit the budget of our clients.
Chemical Composition
Heavy paraffin wax consists mainly of saturated hydrocarbons. The presence of 1-3% oil content helps in determining its specific properties and suitability for different applications.
General Properties
– Melting Point: Typically between 58°C and 64°C (136°F – 147°F).
– Density: Around 0.9 g/cm³.
– Oil Content: 1-3%.
– Color: Usually white or slightly off-white.
– Odor: Mild to no odor.
– Hardness: Relatively harder than light paraffin wax due to lower oil content.
– Solubility: Insoluble in water, soluble in organic solvents like benzene and ether.
Safety, Handling and storage
– Safety Data: Refer to the Material Safety Data Sheet (MSDS) for detailed safety and handling information.
– Handling: Use gloves and protective clothing to prevent skin contact. Ensure good ventilation if melting the wax.
Storage:
– Temperature: Store in a cool, dry place, ideally between 10°C and 25°C (50°F and 77°F) to prevent melting and deformation.
– Humidity: Keep in a low-humidity environment to prevent moisture absorption.
– Ventilation: Ensure good ventilation to avoid any build-up of fumes in case of minor melting or leakage.
Paraffin Wax Semi Refined 1-3% Oil Content Production Process
1. Crude Oil Distillation: Paraffin wax is derived from the fractional distillation of crude oil.
2. Sweating: Removes oil from the wax, which controls the oil content to the desired level.
3. Hydrogenation: Purifies the wax by removing impurities and enhancing color and odor.
4. Solidification: The liquid wax is cooled and solidified into blocks or slabs.
Paraffin Wax Semi Refined 1-3% Oil Content Application
– Candle Making: Provides a stable and long-burning fuel source.
– Coatings and Polishes: Used in polishes for furniture and cars due to its glossy finish and protective properties.
– Cosmetics: Found in products like lip balms and creams for its emollient properties.
– Packaging: Utilized in food packaging to prevent moisture loss.
– Rubber and Tyre Industry: Acts as a protective layer to prevent cracking.
– Textile Industry: Used in fabric treatments to provide a smooth finish.
Benefits
– Consistency: The controlled oil content ensures consistent quality and performance.
– Versatility: Suitable for a wide range of applications.
– Stability: Offers good thermal and chemical stability.
– Appearance: Provides an aesthetically pleasing finish to products.
Paraffin Wax 1-3% Oil Content Packing
Heavy paraffin wax is typically packaged in various forms to suit different handling and transportation needs. Common packaging types include:
1. Slabs or Blocks
– Weight: Usually packed in slabs or blocks weighing 5 kg, 25 kg, or 30 kg.
– Material: Wrapped in polyethylene bags and then packed in cardboard cartons or wooden crates.
– Protection: The slabs are often lined with a layer of plastic or wax paper to prevent sticking and to provide additional protection against contamination.
2. Pellets or Granules
– Weight: Typically available in 25 kg bags.
– Material: Packed in high-density polyethylene (HDPE) bags or woven polypropylene (PP) bags.
Benefits:
Easier to handle, measure, and melt compared to larger blocks. They also reduce the risk of contamination and allow for more precise dosing in industrial processes.
Paraffin Wax 1-3% Oil Content Specification
| Characteristic | value | Unit | ASTM Standard |
|---|---|---|---|
| Oil Content | 1-3 | % | D-721 |
| Appearance | Slab Form | -- | -- |
| Congealing Point | 63 | C | D-938 |
| Color | White | -- | -- |
| Odor | Odorless | -- | -- |
| Drop Melting Point | 64-66 | C | D-127 |
| Flash Point | 230±10 | C | D-92 |
| Kinematic Viscosity at 100 C | 4-6 | Cst | D-445 |
| Specific Gravity at 25 C | 0.83±0.2 | g/Cm3 | D-445 |
